Owner's Manual Summary

The manual was written in by Yamaha. The language is listed as follows: Owner's Manual English. The manual is applied to the following one product model as follows: UX256. The manual was created in Portable Document Format, called as PDF manual. The PDF document file with the name of ux256e.pdf has 34 pages with the file size of 2.2Mb. The digital document is original with no watermarks.

Owner's Manual Information

Brand:Yamaha
Category: Musical Instruments
Model:UX256
Type:Instruction Manual
Language:English English Manual
File info:PDF / 2.2Mb / 34 pages
Support:

PDF File Information

Title: UX256.book
Author: Yuko Watanabe
Creator: FrameMaker 5.5
Producer: Acrobat Distiller 3.0.2J (Power Macintosh 版)
CreationDate: Mon Mar 27 11:15:58 2000
ModDate: Tue Jul 29 21:56:50 2003
Tagged: no
Pages: 34
Encrypted: no
Page size: 420 x 595 pts
File size: 2304542 bytes
Optimized: no
PDF version: 1.5

PDF Bookmark and List of Contents

  • UX256 Cover

    • Welcome to the UX256
    • Table of contents
      • SPECIAL NOTICES
  • UX256 Features

    • USB
    • Notes on USB
  • Package Contents

    • About the included software
  • System Requirements

  • Specifications

  • Parts and Functions

    • A ON/STANDBY switch
    • B POWER LED
    • C USB LED
    • D TO TG terminals 1 and 2
    • E MIDI terminals 1-6
    • F USB terminal
    • G DC IN jack
  • Connection

    • (1) Connecting the included power adaptor
      • 1. Set the ON/STANDBY switch on the UX256 to off (standby).
      • 2. Connect the plug of the power adaptor (PA-3B) to the DC IN jack on the rear panel of the UX256.
      • 3. Connect the power adaptor to the appropriate AC outlet.
    • Connection
      • (2) Connecting a computer
      • (3) Connecting the TO TG terminal to a MIDI device
      • (4) Connecting the MIDI terminals to a MIDI device
    • Connection
      • (5) Connecting USB hubs
      • USB hub
  • Installing the Driver

    • Installing the Driver
      • Installing the driver on a Windows 98 system
        • Follow the steps below to install the driver.
          • 1. Start the computer.
          • 2. Make sure that the power to the UX256 is turned off (standby). Connect the USB terminal of the...
          • 3. Turn on the power to the UX256. The system displays the “Add New Hardware Wizard.”
          • 4. Click [Next]. The system displays a screen that enables you to select search method.
    • Installing the Driver
      • 5. Check the radio button to the left of “Search for the best driver for your device. (Recommende...
      • 6. Insert the included CD-ROM into the CD-ROM drive. After making sure that the system recognizes...
      • 7. When the system detects the driver in the CD-ROM and is ready for installation, it displays th...
    • Installing the Driver
      • 8. When installation is complete, the following screen appears. Click [Finish].
      • Checking the installation
        • 1. Double-click “System” in the Control Panel to open the System Properties window.
        • 2. Click the “Device Manager” tab and check to see if “YAMAHA USB MIDI Driver” is listed.
    • Installing the Driver
      • Selecting the destination for the MIDI signal output
        • 1. Click “Multimedia” in the Control Panel to open the Multimedia Properties window.
        • 2. Click the “MIDI” tab and check to see if “Yamaha USB OUT xx-yy” is listed.
        • 3. While “Single instrument” is selected, select a driver according to the port number of the con...
      • Connecting multiple UX256s
        • 1. Start the computer.
        • 2. Make sure the power to the UX256s is turned off (standby). Connect the USB terminal of the com...
        • 3. Turn on the power to the UX256s.
    • Installing the Driver
      • Installing the driver on a Macintosh system
        • 1. Start the computer.
        • 2. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the d...
        • 3. Double-click the CD-ROM icon and double-click the “Install OMS 2.3.6” icon in the “OMS” folder.
        • 1. Start the computer.
        • 2. Insert the included CD-ROM into the CD-ROM drive.
        • 3. Double-click the CD-ROM icon and double-click the “Install USB Driver” icon to display the fol...
    • Installing the Driver
      • 4. The “Install Location” box displays the destination of the installation. If you wish to change...
      • 5. Click the [Install] button. The system displays the following message: “This installation requ...
      • 6. The installation starts. If the driver has already been installed, you will receive the follow...
      • 7. When the installation is complete, the system displays the following message: “Installation wa...
    • Installing the Driver
      • 1. Start the computer.
      • 2. Make sure that the power to the UX256 is turned off (standby). Then connect the USB terminal o...
      • 3. Turn on the power to the UX256. Make sure the red POWER LED and green USB LED on the UX256 lig...
      • 4. Open the “OMS Applications” folder in the “Opcode” folder installed on the hard disk, and doub...
      • 5. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the subsequent dialog...
      • 6. The system displays the “Create a New Studio Setup” dialog box. If this dialog box does not ap...
    • Installing the Driver
      • 7. Click [OK]. The system displays the “OMS Driver Search” dialog box. Remove the check from the ...
      • 8. After the search operation is complete, make sure that “USB-MIDI 1” is listed in the “OMS Driv...
    • Installing the Driver
      • 9. Make sure that “USB-MIDI 1” and multiple Port numbers are listed in the “OMS MIDI Device Setup...
      • 10. Click [OK].
      • 11. The system displays a dialog box that enables you to save the setup file. Enter the file name...
    • Installing the Driver
      • 12. After you save the file, the system displays the following window. The setting is complete if...
      • 13. You can also improve the setup view by changing the name and icon for each port. For more inf...
      • Using 2 or more UX256s
  • Changing the driver setting (MIDI Patch Screen)

    • Changing the driver setting (MIDI Patch Screen)
      • Starting the MIDI Patch screen
        • 1. Double-click “Control Panel” in the “My Computer” folder.
        • 2. Double-click “MIDI-USB Driver” to display the screen.
    • Changing the driver setting (MIDI Patch Screen)
      • Changing the device number
      • Checking the signal path
    • Changing the driver setting (MIDI Patch Screen)
      • Changing the connection during playback (PC OUT Æ MIDI OUT)
      • Routing MIDI signals from the computer’s output ports 1, 2, and 3 to MIDI OUT 1 on the UX256
    • Changing the driver setting (MIDI Patch Screen)
      • Changing the connection during recording (MIDI IN Æ PC IN)
      • Routing MIDI signals from MIDI IN 2, 3, and 4 on the UX256 to the computer’s input port 1
    • Changing the driver setting (MIDI Patch Screen)
      • THRU output of MIDI signals (MIDI IN Æ MIDI OUT)
      • Routing MIDI signals directly from MIDI IN 2 to MIDI OUT 3
  • Troubleshooting (FAQ)

    • The driver cannot be installed.
      • 1. Double-click “System” in the Control Panel to open the System window.
      • 2. Double-click the “Device Manager” tab and make sure that no “!” or “x” marks appear at “Univer...
      • 1. Double-click “System” in the Control Panel to open the System window.
      • 2. Double-click the “Device Manager” tab. With the “View devices by type” check box checked, look...
      • 3. If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” ...
      • 4. Remove the USB cable from the UX256, and make the connection again.
      • 5. Install the driver by following the steps (starting from Step 3) described on page14.
    • The UX256 does not operate correctly, or no sound is heard.
    • Troubleshooting (FAQ)
      • Playback response is delayed.
      • Cannot suspend or resume the computer correctly.
      • How can I remove or re-install the driver?
        • 1. When the UX256 is recognized correctly, double-click “System” in the Control Panel to open the...
        • 2. Double-click the “Device Manager” tab, select “YAMAHA USB MIDI Driver” and remove it.
        • 3. Use MS-DOS prompt or Explorer to remove the following three files.
        • 4. Turn off the power to the UX256 and remove the USB cable.
        • 5. Restart the computer.
        • 6. Re-install the driver according to the instructions on page14.
        • 1. Delete the files in the following locations: System Folder | Control Panels | YAMAHA USB MIDI ...
        • 2. Re-start the computer.
        • 3. Install the driver (page18) and set up OMS (page20).
      • Wish to use the UX256 in MIDI-supported games.
        • 1. Double-click “Multimedia” in the Control Panel.
        • 2. Click the “MIDI” tab and select the driver according to the port number of the connected tone ...
      • Wish to use the UX256 with a Windows NT machine